Lang's Scatterblaster kit for airsoft FABARM STF-12

"I like to keep this handy, for close encounters"

Scatterblaster are devastating weapons, capable of firing multiple bolts of plasma at once. Build your own Scatterblaster with these files and blow away your opponents, 3 hits at a time !

The kit is easy to print with minimal supports and easy to assemble, just follow the instructions in the included PDF manual. All parts fit onto a ender 3 bed (230x230mm). With this kit, you won't need any additional screws, the front end and the scope rail screw onto the STF12 in place of the top picatinny rail, using the same screws locking the kit securely in place. the side greeble is glued onto the body.

Installing the kit requires to remove the muzzle break, the magazine front plastic cylinder thing and front sling point. The kit doesn't interfere with the functionality of the gun, reloading and actioning the pump is still fast and easy. If you want to use a sling, you can put a sling point onto the picatinny rail of the pump.

For the scope, I used a cheap 4x20 scope and matching rings that mounts on dovetail mount. (You can find sets of scopes + rings at less than 10 USD on Aliexpress)

the side greeble can be attached in two ways : you can either glue it on the side of the gun (which is the most screen accurate, but not reversible) or you can glue the greeble to the scope rail using the provided alternative version of the scope rail. This way the conversion is completely reversible.

This kit has only been tested on the spring version of the STF-12, not the Gas version.

Beside these files you will need :

• A 3D printer and filament
• A FABARM STF12 airsoft replica
• 4x20 scope and matching rings
• a screwdriver
• Glue

Update 26/05/2022 : the scope mount now comes in 3 versions for picatinny, American 3/8in dovetail and European 11mm dovetail. Also the tolerances has been adjusted so the pump has more clearance, thanks Anders Albertsson for pointing this out.

These are 3D files for 3D printing, not a physical product. These files are for personal use only, you, as the end user, may not share, modify or sell these files nor sell prints of these files or use them for any commercial endeavor. You may only sell prints of these files is you are subscribed to the Tidal Lock commercial license.

Due to the digital nature of these files, I cannot provide exchanges, returns or cancellations. But I'll be happy to work with you to resolve any issue. You can contact me at tidallockintergalactic@gmail.com or on facebook :

This is a fan product, its content is not endorsed of affiliated with Disney.